Hotline
News

4-Aminoantipyrine

4-aminoantipyrine structural formula

Structural formula

Business number 01TB
Molecular formula C11H13N3O
Molecular weight 203.24
label

1,5-dimethyl-2-phenyl-4-amino-3-pyrazolone,

4-Amino-1,2-dihydro-1,5-dimethyl-2-phenyl-3H-pyrazol-3-one,

4-amino-2,3-dimethyl-1-phenylpyrazolone-[5],

4-Aminoantipyrine crystal,

4-Aminoantipyraline,

4-Aminoantipyrine,

1,5-Dimethyl-2-phenyl-4-aminopyrazoline,

4-Amino-2,3-dimethyl-1-phenyl-3-pyrazolin-5-one,

Ampyrone

Numbering system

CAS number:83-07-8

MDL number:MFCD00003145

EINECS number:201-452-3

RTECS number:CD2480000

BRN number:181635

PubChem number:24890855

Physical property data

1. Character: light yellow crystal

2. Density (g/mL, 25/4℃): 0.8

3. Relative vapor density (g/mL, air =1): Uncertain

4. Melting point (ºC): 109

5. Boiling point (ºC, normal pressure): Uncertain

6. Boiling point (ºC, 5.2kPa): Uncertain

7. Refractive index: Uncertain

8. Flash point (ºC): Uncertain

9. Ratio Optical rotation (º): Uncertain

10. Autoignition point or ignition temperature (ºC): Uncertain

11. Vapor pressure (kPa, 25ºC): Uncertain

p>

12. Saturated vapor pressure (kPa, 60ºC): Uncertain

13. Heat of combustion (KJ/mol): Uncertain

14. Critical temperature (ºC ): Uncertain

15. Critical pressure (KPa): Uncertain

16. Log value of oil-water (octanol/water) partition coefficient: Uncertain

17. Explosion upper limit (%, V/V): Uncertain

18. Explosion lower limit (%, V/V): Uncertain

19. Solubility: soluble Soluble in water, benzene and ethanol, slightly soluble in ether

Toxicological data

1. Acute toxicity:

Rat caliber LD50: 1700 mg/kg; rat abdominal LD50: 1200 mg/kg

Mouse caliber LC50: 800 mg/kg ; Mouse abdominal LC50: 270 mg/kg

2. Teratogenicity

E. coli: 312 ug/well; Salmonella: 5 umol/plate

Ecological data

None yet

Molecular structure data

1. Molar refractive index: 58.10

2. Molar volume (cm3/mol): 168.3

3. Isotonic specific volume (90.2K): 442.1

4. Surface tension (dyne/cm): 47.5

5. Polarizability (10-24cm3): 23.03

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): 0.1

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 3

4. Number of rotatable chemical bonds: 1

5. Number of tautomers: 2

6. Topological molecular polar surface area (TPSA): 49.6

7. Number of heavy atoms: 15

8. Surface charge: 0

9. Complexity: 305

10. Number of isotope atoms : 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the chemical bond configuration Number of centers: 0

14, Number of uncertain chemical bond stereocenters: 0

15, Number of covalent bond units: 1

Properties and stability

1. In the presence of alkaline conditions and oxidants, it reacts with phenolic compounds to produce red dye.

2. It is harmful if taken orally and is irritating to the eyes, respiratory system and skin.

Storage method

Argon-filled sealed and stored in a cool, dry and dark place.

Synthesis method

1. Antipyrine is nitrosated with sodium nitrite, reduced with ammonium bisulfite and ammonium sulfite, hydrolyzed with sulfuric acid, and finally neutralized with liquid ammonia to obtain 4-aminoantipyrine. The process is as follows: Antipyrine and 50% sulfuric acid are mixed into a solution, which contains 38%-40% antipyrine and 11%-12% sulfuric acid. Flow this solution and sodium nitrite solution into the nitrosation reactor at the same time, control the flow rate of both, control the reaction temperature to 45-50°C, react under stirring, and use iodine powder starch test paper to measure the reaction end point to adjust the water flow rate. The nitrosantipyrine generated by nitrosation immediately flows into the reduction tank and reacts with the aqueous solution of the reducing agents ammonium bisulfite and ammonium sulfite prepared in the tank. Take a sample to measure the pH value and degree of reduction. The pH value is between 5.4-5.8 and the degree of reduction is about 15 (that is, the number of milliliters of 0.1N iodine solution consumed by 1ml of reducing solution). After the reduction is completed, the pH value is adjusted to 5.8-6.0, and the reduction degree is about 5. Raise the temperature to 100°C and hydrolyze for 3 hours. Lower the temperature to 80°C, neutralize with liquid ammonia to pH 7-7.5, and let stand for layering. Separate the waste water to obtain 4-aminoantipyrine oil (content above 80%). Press it into a crystallization tank, stir, cool and crystallize, and filter to obtain 4-aminoantipyrine.

2. Antipyrine is nitrosated, reduced by ammonium bisulfite and ammonium sulfite, hydrolyzed with sulfuric acid, and finally neutralized with liquid ammonia And 4-aminoantipyroline can be obtained.

Purpose

1. Used to determine alcohol, phenol, amines and their homologues. Chromatographic determination of alkylphenols.

2.Used as a chromogenic reagent for the photometric determination of phenols, alcohols, and amine organic compounds. And used as a reagent for polarographic determination of phenolic compounds.

extended-reading:https://www.newtopchem.com/archives/category/products/page/96
extended-reading:https://www.bdmaee.net/fascat-9102-catalyst/
extended-reading:https://www.bdmaee.net/nt-cat-a-4-catalyst-cas8001-28-0-newtopchem/
extended-reading:https://www.bdmaee.net/catalyst-dabco-bx405-bx405-polyurethane-catalyst-dabco-bx405/
extended-reading:https://www.bdmaee.net/nt-cat-la-13-catalyst-cas10046-12-1-newtopchem/
extended-reading:https://www.newtopchem.com/archives/40061
extended-reading:https://www.bdmaee.net/n-methyl-pyrrolidone-nmp-cas872-50-4/
extended-reading:https://www.bdmaee.net/teda-l33b-polyurethane-amine-catalyst-tosoh/
extended-reading:https://www.bdmaee.net/sponge-hardener/
extended-reading:https://www.bdmaee.net/dinbutyltindichloride/

Tags:
Prev:
Next: